产品信息 详细>>
动态三维XD水切割刀头

动态三维XD水切割刀头

产品厂家:福禄超高压水射流技术(上海)有限公司

规格型号:水切割刀头厂家

产品类别:刀头

产品介绍:

动态水刀®XD介绍了福禄首创的高精度三维切割技术,它把三维功能与动态水刀技术结合 - 使您的切割精度、速度和灵活性达到极致

动态三维XD水切割刀头_相关采购信息/最新采购信息
采购沈阳245厂光鼓机 CS 8372 刀头[2022-11-22 17:28:28]

沈阳245厂刀头,多少钱一套?                        北京

五金店采购刀头[2021-10-22 17:12:04]

五金店采购刀头,QM3DCGT11T301MF NAM3 (5508262),先要几盒,年一万元需求。                    浙江 台州  

农机配件焊刀头加工定制 图[2021-06-25 11:46:06]

农机配件焊刀头加工定制,材料30MnB,产品标1,2,3的地方加工一下客户要焊刀头,产品硬度45-55HRC,数量:2000件,重量:2.6KG,每批2000件,一年3批,能做我们提供三维图。           浙江 宁波  

采购锯片 金刚石刀头 参数[2020-11-06 13:14:18]

采购锯片 金刚石刀头,我们需要银焊料,焊接,切割混凝土用的锯片和金刚石刀头,我们要的是49银和40的产品,能满足的话对接一下。     山东 青岛 TECHNICAL SHEET  Ag49MnNi Product name Ag49MnNi Class of product Silver based brazing aloy, cadmium-free Corresponding standards ISO 17672 Ag 449 EN1044 AG 502 AWS A5.8-04 BAg-22 . DIN8513 L-Ag49 Nominal composition (weight %) Ag: 49 Cu: 16 Zn: 23 Ni: 4,5 Mn: Physical and technical properties Melting range (Solidus - Liquidus): 680- 705 °C  Brazing temperature: 715 °C Density: 8,9 g/cm3 Tensile Strength (llr metal): 55 kg/mm2 Recommended joint gap: 0,1- 0,25 mm Continuous service joint operating temp.: -200/ +200 9C  Range of application Ag49MnNi is a special application, admium-free, siver brazing aly, with very good flow properties and exellent tensile strength characteristics. It an be used to braze a wide variety of different metals and alloys, and is particularly suited to join difiultl to braze materials such as cemented carbides, hard-metal, tungsten carbides, etc. The addition of Nickel and Manganese improves the wetting properties and the corrosion resistance of the aloy, and the tensile strength of brazed joints. Brazing procedures range from flame to induction techniques. When brazing in an oxidizing environment a proper flux should be used. Tensile strength of joints brazed with Ag49MnNi will generally exceed base metals strength. Joint strength is however a function of various factors, such as: type of base metals to be joined, type of joint, joint clearance, brazing procedure, etc. Typical applications are in the carbide and diamond tpped tools industry. Characteristics Make-up Rods: 00,5与4,0mm Length: 500/ 1.000 mm Flux Coated Rods: . 01,5中3,0mm Wires: 00,25中3,0mm Spooled and coiled Strips: Thickness: 0,1中1 mm Width: 1,3 中80 mm Rings Preforms from Wire and from Strip Pastes & Powders Other dimensions are available upon request. NOTE:  Information contained in this data sheet are based on the knowledge available to us at the date of last document revision and are believed to be accurate. Anyway, no data contained in this data sheet may be regarded as an assurance of any property of the product. We do not assume any responsibility for results obtained or damages occurred from the use of the information contained in this data sheet. We do not assume any responsibility for any un-proper use of the product. Users should verify the suitability and completeness of information with regard to speafic use the product. As end use of product is not under our direct control, it is the user s responsibility to fully comply with applicable laws and regulations in safety and hygiene.

采购聚氨酯高分子空段清扫器片 刀头 清单图[2020-08-11 08:42:21]

采购聚氨酯高分子空段清扫器片 刀头,我们有设备在用这些配件,请直接报价。       云南 文山  

镗刀头加工定制 图纸[2020-04-14 11:15:44]

镗刀头加工定制,图纸这个,寻加工厂家,先要10个,4台床子用的。      湖北 十堰      4-刀片: CCMT09T308 尺寸: 1C09525x7397xR0 8x7Pos1

采购输送机 清扫器刀头[2019-04-12 09:47:43]

采购输送机 清扫器刀头,水泥厂用的,下面四种,请报价,发货到广东。     湖北 武汉 扫器刀头_L1400*B80*H268.5_B1400带式输送机_聚氨酯_PUR-F300_蒂普拓普  2件  L1200*B80*H268.5_B1200带式输送机_聚氨酯_PUR-F300_蒂普拓普 5件  清扫器刀头_200*200_P-PUR 30件 清扫器_P-PUR,800_B800带式输送机  1件  

采购D80可转位螺旋立铣刀头 图[2019-03-11 12:31:06]

采购D80可转位螺旋立铣刀头,20个,上面 有空的那种。      上海      

采购刀头 801000[2016-03-23 10:45:24]

采购刀头 801000,先要2台,合适的话至少100件。   山东 东营 

求购滚压刀头[2015-08-05 16:22:39]

求购滚压刀头,滚压刀CEO-4DO.8R-S25配这款滚压刀的滚压刀头,我要一个。    江苏 苏州

求购割带机刀头[2013-10-30 15:36:41]

求购割带机刀头,有的请联系我,我要货,谢谢。我是做工业皮带的经销商,代理进口工业皮带(OPTI,GATES,MITSUBOSHI,BANDO...)   上海

二手废旧车床工具 合金刀头 拉刀铣刀 滚刀 丝锥 钻头长期采购[2013-06-02 13:21:45]

二手废旧车床工具 合金刀头 拉刀铣刀 滚刀 丝锥 钻头长期采购,我是回收旧工具的,有多少要多少,生意谈成有提成   山东 济南

合金刀头采购[2013-01-07 09:38:35]

 合金刀头采购,大量采购yg6,yg8合金刀头,有做的请与我联系。河北邢台

合金刀头采购[2012-11-18 08:45:08]

合金刀头采购,大量采购yg6,yg8合金刀头,有做的请与我联系。河北 邢台